Local websites

 
 
V-Series Actuator

V-Series Electric Actuators

Metso’s Valvcon V-Series is a compact, rugged, reliable electric actuator designed for quarter-turn valve and damper applications and is available in both NEMA 4/4X and NEMA 4/4X/7&9 configurations. Notable features include all hardened steal spur gears, standard ISO 5211 mounting interfaces and CSA Certification to both Canadian and US Standards.

Other features include full access to cams and limit switches, 75% duty cycle, fuse protection for inputs and outputs, internal thermal-overload protection, wrench-operated manual override and visual position indication.

The plug-in Control Board option for modulating applications incorporates innovative features such as simple push button set up, auto calibration, selectable input control signal, position feedback signal, and signal fail position selection. Other standard features include local push button control, adjustable dead band, adjustable speed control, and locked output stall protection. The Control Board can be easily configured for reverse acting and split ranging control without any wiring changes.

Other options and accessories include the Iso/Readback and Speed Control/Timer Board options, a holding brake, tropical and standard heater/thermostat options, fully adjustable auxiliary limit switches and a declutchable handwheel override. All of the options are designed for easy field installation. The V-Series is available for valve and damper service up to 3000 inch pounds (250 lb-ft) of torque.

SERIES
TORQUE
OUTPUT
DUTY
CYCLE
1
OPERATION
ENCLOSURE
TEMP.
RANGE
2
VOLTAGE
V



LV
150-600 lb-in
12-50 lb-ft
(16.3-68 Nm)
75%
@ 104° F
(40° C)
Reversing
NEMA 4/4X
or
NEMA 4/4X/7&9
32° - 150° F
(0° - 66° C)
115VAC
230VAC
1000-3000 lb-in
83-250 lb-ft
(113-339 Nm)

1. Duty Cycle is 55% for 3000 lb-in models
2. -40° - 150° F (-40° - 66° C) with heater and thermostat

» Technical bulletins A200-1 - V-Series Electric Actuator
» Sales Brochure P200 - V-Series Electric Actuator
» Maintenance manuals I2100 - V-Series with No Option Board Installed
» Maintenance manuals I2500 - V-Series with Control Board Installed
» Maintenance manuals I2475 - V-Series with Control Board Installed (0-135 Ohm)
» Maintenance manuals I2700 - V-Series with Speed Control / Timer Board Installed
» Maintenance manuals I5500 - V-Series with Iso / Readback Board Installed
» Maintenance manuals I9715 - V-Series Option "K" Mechanical Brake Kit
» Maintenance manuals I9200 - V-Series Auxiliary Feedback Potentiometer Kit
» Maintenance manuals I9900 - 180 Degree & 270 Degree Pot/Camshaft Gear Kits
» Maintenance manuals I9090 - Handwheel Override Kit
» Maintenance manuals I9500 - V-Series Heater/Thermostat and Tropical Heater/Thermostat Kit
» Maintenance manuals I9000 - V-Series Auxiliary Limit Switch Kit
» Maintenance manuals I2010 - V-Series Motor Board Replacement Kit