Local websites

 
 

PTI pesquisa & desenvolvimento

A PTI realiza trabalhos de pesquisa e desenvolvimento internamente e apoia, ativamente, vários programas de pesquisa colaborativos e individuais em universidades de todo o mundo. O objetivo da PTI Metso é desenvolver continuamente nossas capacidades e linhas de produtos.

Coletivamente, nosso grupo já publicou e apresentou mais de 100 trabalhos científicos em importantes conferências internacionais, realizou vários workshops internos e conduziu muitos workshops externos e Road Shows (exposições itinerantes) in loco nas operações de seus clientes. Também colaboramos regularmente como palestrantes voluntários convidados e/ou participamos ativamente na orientação/supervisão e no exame de teses de pós-graduação.

Abaixo você encontrará uma lista com os trabalhos produzidos por nosso grupo. Por favor contate-nos se quiser receber uma cópia de algum trabalho.

  • Aksanı, B.; Sönmez, B. (2000). Simulation of bond grindability test by using cumulative based kinetic model, Minerals Engineering, 13(6), pp. 673-677
  • Aldas, G.G.U., Bilgin, H.A. and Esen, S. 2001. Timing simulation for the selection of optimum delay time, 17th International Mining Congress & Exhibition of Turkey, Ankara, Turkey, pp. 317-322.
  • Anaç, S., Ergün, Ş. L., Sönmez, B. (1994) Effects of Some Variables on the Cumulative Basis Kinetic Model Parameters in Ball Mill Grinding, in Progress in Mineral Processing Technology, Eds:Demirel, H., Ersayın, S., A.A. Balkema Publishers, pp 533-538.
  • Aparicio Ramirez, M.R., Aleman, J.E., Reyes-Bahena, J.L. (2008). Evaluation and stabilization of grinding product using JKSimMet, Proceedings of the XIV Encuentro sobre Procesamiento de Minerales, J. Zapata and M. Zapata (Eds.), 8-10 October, San Luis Potosí, S.L.P., Mexico (In Spanish).
  • Benzer, H. Jankovic, A. and Ergun, L. (2006) Cement Clinker Grinding Practice and Technology, Advances in Comminution, edited by S. Komar Kawatra, SME publication. March, pp. 169-179
  • 3. Bilgin, H.A. and Esen, S. 2000. Assessment of explosive performance by detonation velocity measurements, Ninth International Symposium on Mine Planning & Equipment Selection, Athens, Greece, pp. 21-26.
  • 4. Bilgin, H.A., Esen, S., Kilic, M. and Aldas, G.G.U. 2000. Investigation of ground vibrations induced by blasting at Yeniköy Lignite Mine, The 4th Drilling and Blasting Symposium, Ankara, Turkey, pp. 147-158.
  • 5. Bilgin, H.A., Esen, S., Kilic, M. and Ipek, T. 2000. Improvement of coal size distribution at Ikizköy surface coal mine of Yeniköy Lignite Establishment, The 4th Drilling and Blasting Symposium, Ankara, Turkey, pp. 83-93.
  • 6. Bilgin, H.A., Esen, S. and Kilic, M. 1999. Effect of blasting induced ground vibrations on buildings and the importance of the amplification factor, 16th Mining Congress, Ankara, Turkey, pp. 25-32.
  • 7. Bilgin, H.A. and Esen, S. 1999. Assessment of the performances of some commercial explosives in blasthole at Bastas Quarry, The 2nd National Aggregate Symposium, Istanbul, Turkey, pp. 157-168.
  • 8. Bilgin, H.A. and Esen, S. 1999. Assessment of Ideality of some commercial explosives, 25th Conference on Explosives & Blasting Technique, Nashville, Tennessee, USA, Vol. 1, pp. 35-44.
  • 9. Bilgin, H.A. and Esen, S. 1998. Effect of stemming material on blasting performance, The 3rd Drilling and Blasting Symposium, Ankara, Turkey, pp. 59-70.
  • 10. Butcher, A. and Valery Jnr., W. (2005) Establishing the Links Between Ore Characteristics and Crushing & Grinding Performance, presented at the SME 2005 Conference, Salt Lake City, USA, 28 February to 2 March, 2005.
  • 11. Carr, D. R., Gao, M., Lawson, V. and Valery Jnr., W.(2000) Recent grinding practice in the copper concentrator of Mount Isa Mines Ltd. Seventh Mill Operators’ Conference, AusIMM, Kalgoorlie, WA, pp21-26.
  • 12. Colacioppo, J., Valery Jnr., W. (2006) Integração e Otimização de Processos de Produção em Minas à Céu Aberto. IV Congresso de Mineração à Céu Aberto, IBRAM, Belo Horizonte, Brasil.
  • 13. Colacioppo, J., Valery Jnr., W. (2006) Integración y Optimización de Los Procesos desde la Mina hasta la Concentradora. IV Taller Internacional sobre Procesamiento de Minerales, Santiago, Chile.
  • 14. Colacioppo, J., Rybinski, E., Valery Jnr., W. LaRosa, D. (2007) Integración y Optimización de Procesos de la Mina a la Concentradora – Aplicación en la Compañía Minera Antamina. XXVIII Convención Minera, Arequipa, Peru.
  • 15. Colacioppo, J., Nozawa, E., Valery, W Jnr., Sedat, E. LaRosa, D. (2007) Integração e Otimização de Processos de Desmonte e Cominuição. XXII ENTMME / VII MSHMT, Ouro Preto, Brazil.
  • 16. Colacioppo, J., Valery, W. Jnr., LaRosa, D., Nozawa, E., Wortley, M. (2007) Aplicação das SmartTagTM para rastreamento da Mina à Usina. VIII Simpósio Brasileiro de Minério de Ferro. Salvador, Brazil.
  • 17. Dance, A., Valery, W., Jankovic, A., LaRosa, D. and Esen, S., maintaining the benefit – How to Ensure Mine-to-Mill Continues to Work or you. Proceedings of Ninth Mill Operator Conference, Perth, Australia.
  • 18. Dance, A., (1991) “Development of Electrostatic Separation Models for the Mineral Sands Industry”, 5th AusIMM Conference on Extractive Metallurgy, Perth, Australia.
  • 19. Dance, A., (1992) “Quantifying a Black Art: The Electrostatic Separation of Mineral Sands”, Minerals Engineering, Vol. 5, No. 7, pp. 761-765.
  • 20. Dance, A., (1998) “The Advanced Control Project at Highland Valley Copper”, 30th Annual Meeting of the Canadian Mineral Processors, Ottawa, Canada.
  • 21. Dance, A., (1998) “Tracking Hardness and Size: Measuring and Monitoring ROM Ore Properties at Highland Valley Copper”, Mine to Mill 1998, AusIMM Conference, Brisbane, Australia.
  • 22. Dance, A., (2001) “The Benefits of Mine-Mill Integration”, IPMM-2001: Intelligent Processing and Manufacturing of Materials, Vancouver, Canada.
  • 23. Dance, A., (2001) “The Importance of Primary Crushing in Mill Feed Size Optimisation”, SAG 2001, University of British Columbia, Vancouver, Canada.
  • 24. Dance, A., (2003) “Closing the Loop” – Using Actual Concentrator Performance to Determine the True Value of Ore Sources”, CIM Annual General Meeting, Montreal, Canada.
  • 25. Dance, A., (2004) “Remove the Disturbance: Stabilising SAG Mill Tonnage Through Proper Feed Preparation”, SME Annual Meeting, Denver, USA.
  • 26. Dance, A., Valery Jnr., W., Jankovic, A., La Rosa, D., Esen, S. (2006) Higher Productivity Through Cooperative Effort: A Method Of Revealing And Correcting Hidden Operating Inefficiencies. SAG2006 – HPGR, Geometallurgy, Testing. International Conference on Autogenous and Semiautogenous Grinding Technology, Volume 4, 375 – 390, Vancouver, Canada.
  • 27. Dance, A., Valery, W., Jankovic, A., La Rosa, D., Esen, S. 2007. Maintaining the benefit – How to ensure mine-to-mill continues to work for you, AUSIMM Ninth Mill Operators Conference, Australia.
  • 28. Dance, A., Valery, W., Jankovic, A., LaRosa, D., Esen, S., Colacioppo, J. 2007. Process Integration & Optimisation: A Case Study in Productivity Improvement. AUSIMM 6th Large Open Pit Mining Conference. Australia.
  • de la Fuente Zamarrita, D., Castillo, J., Reyes-Bahena, J.L. (2007). Efficiently use of energy in grinding cricuits at Charcas by simulation, Proceedings of the XXVII Convención Internacional de Mineria, S. Ezquivel (Ed.), 10-13 October, Veracruz, Ver., Mexico (In Spanish).
  • 29. Dunne, R., Morrell,S., Lane, G., Valery Jnr., W. and S. Hart (2001) Design of the 40 Foot SAG Mill Installed at the Cadia Gold Copper Mine. SAG2001 - SAG mill circuit. International Conference on Autogenous and Semiautogenous Grinding Technology, 1, p., Vancouver, Canada
  • 30. Erkoc, O.Y. and Esen, S. 1998. Measurement of blast induced ground vibrations and the evaluation of the vibration recording device outputs, The 3rd Drilling and Blasting Symposium, Ankara, Turkey, pp. 139-149.
  • Ersayın, S., Sönmez, B., Ergün, Ş. L., Aksanı, B., Erkal, F. İ. (1993). Simulation of the Grinding Circuit at Gümüşköy Silver Plant, Turkey, Trans IMM, Sect. C, January-April, vol.102, pp. C32-38.
  • Ersayın, S., Aksanı, B., Ergün, Ş. L., Erkal, F. İ., Gülsoy, Ö. Y., Sönmez, B. (1992). Performance Evaluation at the Grinding Circuit of Gümüşköy Silver Plant, 4th International Mineral Processing Symposium, 20-22th Oct., Antalya-Turkey, pp 42-55.
  • Ersayın, S., Aksanı, B., Ergün, Ş. L., Erkal, İ. F., Gülsoy, Ö.Y., Sönmez, B. (1993). Investigation of a Grinding Problem by Computer Simulation, Proc. of The Int. Congress on Computational Methods in Engineering, Shiraz, Iran, 6-8th May, pp27-34.
  • Ersayın, S., Aksanı, B., Erkal, İ. F., Sönmez, B. (1991), The Effect of Wet and Dry Grinding on the Kinetic Characterization of Size Reduction, Turkish 12th Mining Scientific and Technical Congress, Ankara-TURKEY, May 1991, pp315-329 (In Turkish)
  • Escamilla Ojeda, M.C., Reyes-Bahena, J.L. (2006). Recovery of precious metals from tailings dumps, Proceedings of the XIII Encuentro sobre Procesamiento de Minerales, M. Zapata and J. Zapata (Eds.), 11-13 October, San Luis Potosi, S.L.P., Mexico (In Spanish).
  • Esen, S. (2004). A Statistical Approach to Predict the Effect of Confinement on the Detonation Velocity of Commercial Explosives, Rock Mechanics and Rock Engineering, 37(4), pp. 317-330.
  • Esen, S. (2006). A new non-ideal detonation code for evaluating the performance of commercial explosives. Fragblast-8, Santiago, Chile, pp 160-168.
  • Esen S. (2008). A non-ideal detonation model for evaluating the performance of explosives in rock blasting. Rock Mechanics and Rock Engineering. 41 (3), 467–497.
  • Esen, S. and Bilgin, H.A. 2001. Effect of explosive on fragmentation, The 7th International Conference on Mining, Petroleum and Metallurgical Engineering (MPM), Assiut, Egypt.
  • Esen, S. and Bilgin, H.A. 2001. Evaluation of blast vibrations from Sekköy Surface Coal Mine in Turkey, 27th Conference on Explosives & Blasting Technique, Orlando, Florida, USA, pp. 313-327.
  • Esen, S. and Bilgin, H.A. 1998. Ideal detonation behaviour of commercial explosives and development of an explosive/rock interaction model, The 3rd Drilling and Blasting Symposium, Ankara, Turkey, pp. 47-57.
  • Esen, S., Benzer, H., Jankovic, A., Cook, P. (2006) Pregrinding Technology. World Cement, November, pp. 103-110.
  • Esen, S. and Cook P. (2007). Pregrinding with Barmac Vertical Shaft Impactors – A novel technology to improve the energy efficiency at cement plants. Proceedings of the International Seminar on Mineral Processing Technology, India.
  • Esen, S., LaRosa, D., Dance, A., Valery, W., Jankovic, A., 2007. Integration and Optimisation of Blasting and Comminution Processes. EXPLO 2007. Australia. pp 95-103.
  • Esen, S., Ocal, A. and Atalay, V. 1996. Determination of particle size distribution using digital image processing techniques, The 2nd Drilling and Blasting Symposium, Ankara, Turkey, pp. 41-44.
  • Esen, S., Onederra, I. and Bilgin, H.A. 2003. Modelling the size of the crushing zone around a blasthole. Int. J. Rock Mech. Min. Sci. Geomech. Abstr. 40(4), pp. 485-495.
  • Esen, S., Onederra, I. and Francis, D. 2006. Monitoring and analysis of production waste blasts at the Cadia Hill Gold Mine. Fragblast-8, Santiago, Chile, pp. 393-399.
  • Esen, S., Souers, P.C. and Vitello, P. 2005. Prediction of the Non-Ideal Detonation Performance of Commercial Explosives Using the DeNE and JWL++ Codes, Int J for Numerical Methods in Engineering, 64:1889-1914.
  • Esen, S. and Ural, D. 1999. The use of stochastic methods to determine the dynamic fracture strength, 9th International Congress on Rock Mechanics, Paris, France, pp. 1081-1084.
  • Espinoza-Ortega, O., Song, S., Lopez-Valdivieso, A., Galindo-Murillo, F., Reyes-Bahena, J.L. (2003). Regrinding and floc-flotation of silver sulphide scavenger concentrate, Mineral Processing and Extractive Metallurgy (Trans. Inst. Min. Metall. C), 112, pp. C90-C94.
  • F. Ouchterlony & U. Nyberg, P. Bergman, Esen, S. 2007. Monitoring the blast fragmentation at Boliden Mineral’s Aitik copper mine. Vienna Conference Proceedings 2007, P. Moser et al. pp 47-62
  • Grundstrom, C., Kanchibotla, S., Jankovic, A., Thortnton, D., 2001. Blast Fragmentation for Maximising the Grinding Circuit Throughput at Porgera Gold Mine, Proceedings of the 27 th Annual Conference on Explosives and Blasting Technique, pp 250-258.
  • Guyot, O., Valery Jnr., W. and La Rosa, D. (2004) VisioRock, uma visão integrada de tecnologia para controle avançado de circuitos para agregados, published at the Areia and Brita Magazine, No. 26, June 2004, ANEPAC, Brazil.
  • Harris, M.C., Runge, K.C., Whiten, W.J. and Morrison, R.D., 2002. JKSimFloat as a practical tool for flotation process design and optimisation. In: Mineral Processing Plant Design, Practice, and Control, SME, Vol 1, 461-478.
  • Hart, S., Dioses, J., Gelfi, P., Clementis, B., Valery Jnr., W. and Dunne, R. (2000) Cadia Mines – Reflections after one year’s operation. 2000 SME Annual Meeting in Salt Lake City, 28 Feb-1 March.
  • Hart, S., Valery Jnr., W., Clements, B., Reed, M., Ming Song, Dunne, R. (2001) Optimisation of the Cadia Hill SAG Mill Circuit. SAG2001 - SAG mill circuit. International Conference on Autogenous and Semiautogenous Grinding Technology, 1, p., Vancouver, Canada
  • Isokangas E, Byrnes A, Coglan J, Drogemuller R, et.Al, 2009. Interoperable Standards Development : Final Report, CRC for Construction Innovation, Brisbane.
  • Isokangas E, Measuring Dragline Performance Initiatives, 1997. International Congress on Automation Technologies, Brisbane.
  • Isokangas E, 1996. Aspects of process control in mineral sand dry plants, University of Queensland.
  • Jankovic, A. and Morrell, S., 1998. A Study of Fine Particles Breakage Characterization. Proceedings of 4th Conference on Environment and Mineral Processing, VSB-Tu Ostrava, Czech Republic., pp 9-15
  • Jankovic, A., 1987. Shortened Procedure for Bond Work Index Determination; October Consultations-Collection of Papers, Bor, Yugoslavia.
  • Jankovic, A., 1988. Contribution to the Theory of Screening Kinetics; Zbornik Radova Glasnika Rudarstva I Metalurgije (Journal of Mining and Metallurgical Engineering Collection of Papers) vol 24 No2.
  • Jankovic, A., 1990. Laser Particle Size in Mineral Processing; Conference on Technologies Advancement and Rationalization in Geology Mining and Metallurgy, Collection of Mineral Processing Papers, Belgrade, Yugoslavia.
  • Jankovic, A., 1991. Hydrocyclone Optimisation by use of the Experiment Design Method; XIII Yugoslav Mineral Processing Symposium-Collection of Papers, Gornji Milanovac, Yugoslavia.
  • Jankovic, A., 1991. Methods for Size Distribution Determination in Mineral Processing; Tehnica, Journal of Yugoslav Engineers and Technicians Association vol 3-4.
  • Jankovic, A., 1991. Mill Optimisation by use of the Experimental Design Method; II Symposium on Mathematical Method and Computer Application in Geology Mining and Metallurgy-Collection of Papers; Belgrade, Yugoslavia.
  • Jankovic, A., 1992. Mathematical Model of Grinding Kinetics in the Bond Ball Mill; Zbornik Radova Glasnika Rudarstva I Metalurgije (Journal of Mining and Metallurgy-Collection of Papers), vol 5. No 4. Bor, Yugoslavia.
  • Jankovic, A., 1992. Mathematical Model of the Grinding Kinetics in the Bond Rod Mill; Zbornik Radova Glasnika Rudarstva I Metalurgije (Journal of Mining and Metallurgy-Collection of Papers), vol 6. No 2. Bor. Yugoslavia.
  • Jankovic, A., 1993. Observations on the Bond Grindability Test and Proposals for Its Improvement; Second JKMRC Postgraduate Conference, Brisbane, Australia. September
  • Jankovic, A., 1995. Comparison of a laboratory tower and tumbling ball mill, Zbornik Radova Glasnika Rudarstva I Metalurgije, (Journal of Mining and Metallurgical Engineering Collection of Papers) vol 31 No2.
  • Jankovic, A., 1995. Stirred Mills Modeling - Literature Review, Zbornik Radova Glasnika Rudarstva I Metalurgije, (Journal of Mining and Metallurgical Engineering Collection of Papers) vol 32 No3.
  • Jankovic, A., 1997. Extension and Facilitation of the Bond Grindability Test; 7 th Balkan Conference on Mineral Processing, Vatra Dornei, Romania. pp 81-89.
  • Jankovic, A., 1997. Power Modelling of Stirred Mills, Proceedings of the Second UBC-MCGILL BI- Annual International Symposium on Fundamentals of Mineral Processing and the Environment, Sudbury, Ontario, August, pp 463-470.
  • Jankovic, A., 1997. Vertical Pin Stirred Mills Power Modelling, New Trends in Mineral Processing II, Proceedings, VSB - Technicka Univerzita Ostrava, June
  • Jankovic, A., 1998. Tower Mill Grinding Efficiency, Journal of Mining and Metallurgy-Collection of Papers, Section A: Mining, vol 34. No 3-4. Bor, Yugoslavia. ., pp 164-173
  • Jankovic, A., 1999. Mathematical Modelling of Stirred Mills, PhD Thesis – University of Queensland, JKMRC, Brisbane, Australia.
  • Jankovic, A., 2000. Fine Grinding In Australian Minerals Industry, Journal of Mining and Metallurgy-Collection of Papers, Section A: Mining, vol 36. No 5-6. Bor, Yugoslavia. pp 51-61.
  • Jankovic, A., 2001. Media Stress Intensity Analysis for Vertical Stirred Mills, Minerals Engineering, vol 14. Special issue from MEI Conference Comminution 01, Brisbane - Australia, ., pp 1177-1186
  • Jankovic, A., 2003. Variables Affecting the Fine Grinding of Minerals Using Stirred Mills, Minerals Engineering vol 16, pp 337-345,. paper presented at MEI Conference 02, Perth – Australia.
  • Jankovic, A., and S, Morrell., 2000. Scale-Up Of Tower Mill Performance Using Modelling And Simulation, Proceedings of XXI IMPC, Rome – Italy. pp A3 1-8
  • Jankovic, A., Cervellin, A. (2004) Coarse Grinding with Laboratory Pin Stirred Mill, presented at the 36th International Conference on Mining and Metallurgy, Bor Lake, Serbia and Montenegro. 29 September- 2 October 2004.
  • Jankovic, A. and Magdalinovic. N., 1990. Multihidrocyclone - New Unit for Classification; Conference on Technologies Advancement and Rationalization in Geology Mining and Metallurgy, Collection of Mineral Processing Papers, Belgrade, Yugoslavia.
  • Jankovic, A. and Markovic, Z., 2002. Pebble Milling for Reduced Throughput. Proceedings of 34th IOC on Miming and Metallurgy 2002 Conference, Bor Lake, Yugoslavia, 30 Sep. -3 Oct. pp 299-305.
  • Jankovic, A. and Morrell, S., 1996. Evaluation of the Performance of the KHD Micro-Screen, poster presentation at Minerals Engineering Conference; Brisbane, Australia, August
  • Jankovic, A., Trumic, G., Trumic, M., Markovic, Z., 1997. Extension and Facilitation of the Bond Grindability Test; Proceedings of 7 th Balkan Conference on Mineral Processing, Vatra Dornei, Romania. pp 81-89.
  • Jankovic, A., Young, M., Hinds, D., 1999. Tower fine Milling Experience at Mount Isa Mines. In: N. Jackson, G. Dunlop, and P. Cameron (Editors), Mineral Processing & Hydrometallurgy Plant Design, Australian Mineral Foundation, ISBN No: 0-908039-70-0, pp 243-250
  • Jankovic, A., Valery, W., Maloney, K., Markovic Z. S. (2006) Improving Overall Concentrator Performance with Stirred Milling. Proceedings of XXIII International Minerals Processing Congress, Istanbul, Turkey, 3-8 September, Vol 2, pp. 1949-1954.
  • Jankovic, A. and Valery Jnr. W. (2005). Fine and Ultra fine grinding – the facts and myths, presented at the 6th Annual I.I.R. Crushing and Grinding Conference, Perth, Australia. 29-30 March 2004.
  • Jankovic, A., and Valery, W., 2002. Mine to Mill Optimisation for Conventional Grinding Circuits – A Scoping Study. Journal of Mining and Metallurgy, 38 (1-4), pp 49-66.
  • Jankovic, A. and Valery Jnr., W. (2004) Design and Operation of Vertimill® for Secondary Grinding, presented at the 36th International Conference on Mining and Metallurgy, Bor Lake, Serbia and Montenegro. 29 September- 2 October 2004.
  • Jankovic, A., Valery Jnr., W. and Davis, E. (2004) Cement Grinding Optimisation, presented at Comminution 2004 Conference and published at the Minerals Engineering Journal, Vol.17 No.11-12, 2004
  • Jankovic, A., Valery Jnr., W. and La Rosa, D. 2003. Fine Grinding in the Australian Mining Industry. To be presented at the 3rd. International Conference on Recent Advances in Materials, Minerals and Environment (RAMM 2003) in Malaysia.
  • Jankovic, A., W., Valery Jnr., Clarke, G. (2006) Design And Implementation Of An AVC Grinding Circuit at BHP Billiton Cannington. SAG2006 – Circuit Design. International Conference on Autogenous and Semiautogenous Grinding Technology, Volume 2, 290 – 300, Vancouver, Canada.
  • Kanchibotla, S. S., Valery Jnr., W. and Morrell, S. (1999) Modelling fines in blast fragmentation and its impact on crushing and grinding. Explo’99 Conference, Kalgoorlie, WA.
  • Kanchibotla, S.S., Morrell, S., Valery Jnr., W. and O’Laughlin, P. (1998) Exploring the Effect of Blast Design on SAG Mill Throughput at KCGM. Paper presented at the Mine to Mill Conference, in Brisbane, Australia, October, 1998.
  • Karageorgos, J., Skrypniuk, J., Valery Jnr., W., Ovens, G. (2001) SAG Milling At The Fimiston Plant (KCGM). SAG2001 - SAG mill circuit. International Conference on Autogenous and Semiautogenous Grinding Technology, 1, p., Vancouver, Canada
  • Karageorgos, K., Burford, B., Valery Jnr., W., Rohner, P., Johnson, N.W., and Morrell, S. (1996) Copper concentrator autogenous grinding practices at Mount Isa Mines Limited. International Conference on Autogenous and Semiautogenous Grinding Technology, 1, p. 145-163, Vancouver, Canada.
  • La Rosa, D. Cantarutti, A., Clarke, G., Wortley, M., Bouche, C. and Guyot, O., An Integrated Expert and Vision System at BHP Biliton Cannington, Proceedings of Ninth Mill Operator Conference, Perth, Australia.
  • La Rosa, D., Girdner, K., Valery Jnr., W. and Abramson, S. (2001) Recent Applications Of The Split-Online Image Analysis System. Proceedings of the Southern Hemisphere Meeting on Mineral Technology – Volume 1, Rio de Janeiro, Brazil, 27th May – 1st June 2001, pp 15-19
  • Lam, M., Jankovic, A., Valery Jnr., W., Kanchibotla, S (2001) Increasing SAG Mill Circuit Throughput at Porgera Gold Mine by Optimising Blast Fragmentation. SAG2001 - SAG mill circuit. International Conference on Autogenous and Semiautogenous Grinding Technology, 1, p., Vancouver, Canada
  • Lawson, V., Carr, D., Valery Jnr., W., Burford, B., Pease, J., Man, Y (2001) Evolution and Optimisation of the Copper Concentrator Autogenous Grinding Practices at Mount Isa Mines Limited. SAG2001 - SAG mill circuit. International Conference on Autogenous and Semiautogenous Grinding Technology, 1, p., Vancouver, Canada
  • Lopez Valdivieso, A., Madrid Ortega, I., Reyes-Bahena, J.L., Sánchez Lopez, A., Song, S. (2006). Properties at the interface molibdenite/aqueous solution and its relationship with the molibdenite floatability, Proceedings of the CIME 2006, A. Uribe Salas and F. Nava (Eds.), 26-28 April, Saltillo, Coah., Mexico (In Spanish).
  • Lopez Valdivieso, A., Reyes-Bahena, J.L. (2005). Chalcopyrite, pyrite, and molibdenite flotation from porphyry copper ore, Proceedings of the X Simposio sobre Procesamiento de Minerales, 14-18 November, Chillan, Chile (In Spanish).
  • Lopez-Valdivieso, A., Reyes-Bahena, J.L., Ibarra-Amaya, A. (1999). Gravity concentration of gold and silver: its implementation in the grinding circuit at El Pilon, Proceedings of the XXIII Congreso Internacional de Mineria, 23-27 October, Acapulco, Guerrero, Mexico (In Spanish).
  • Lopez-Valdivieso, A., Reyes-Bahena, J.L., Song, S., Herrera-Urbina, R. (2006). Temperature effect on the zeta potential and fluorite adsorption at the -Al2O3/aqueous solution interface, Journal of Colloid and Interface Science, 298: 1-5.
  • Magdalinovic. N., Budic. I., Markovic. Z.S., Jankovic, A., 1989. Optimal Crusher Product Size Determination in RTB Bor Mineral Processing Plants; Octobers Consultations- Collection of Papers, Bor, Yugoslavia.
  • Magdalinovic. N., Budic. I., Markovic. Z.S., Jankovic, A., 1990. Mathematical Model for Determination of a Optimal Crusher Product size; AufbereitungTechnic, 31.(1990) No5.
  • Magdalinovic. N., Budic. I., Markovic. Z.S., Jankovic, A., 1995. The Energy for Copper Ore Crushing; Proceedings of 6 th Balkan Conference on Mineral Processing, Ohrid, Republic of Macedonia. September 18-21.
  • Miller A, Radcliffe D, Isokangas E, 2009. A perception-influence model for the management of technology implementation in construction, Construction Innovation: Information, Process, Management. Volume 9 issue 2 (pp. 168 - 183)
  • Morrell, S. and Valery Jnr., W. (2001) Influence of Feed Size on AG/SAG Mill Performance. SAG2001 - SAG mill circuit. International Conference on Autogenous and Semiautogenous Grinding Technology, 1, p., Vancouver, Canada
  • Morrell, S., Valery Jnr., W., Banini, G. and Latchireddi, S. (2001) Developments In AG/SAG Mill Modelling. SAG2001 - SAG mill circuit. International Conference on Autogenous and Semiautogenous Grinding Technology, 1, p., Vancouver, Canada.
  • Morrison, R. and Valery Jnr., W. (1999) JKTech software for process design and optimisation. IRR Crushing and Grinding Conference, Perth, WA 29-31 March.
  • Morrison, R., Cleary, P., Valery Jnr., W. (2001) Comparing Power and Performance Trends From DEM and JK Modelling. SAG2001 - SAG mill circuit. International Conference on Autogenous and Semiautogenous Grinding Technology, 1, p., Vancouver, Canada.
  • Nelson, M., Valery Jnr., W., and Morrell, S. (1996) Performance characteristics and optimisation of the Fimiston (KCGM) SAG mill circuit. International Conference on Autogenous and Semiautogenous Grinding Technology, 1, p. 233-248, Vancouver, Canada.
  • Nott, M., Valery Jnr., W. and Shi, F. (2003). Fines Minimisation in the Comminution of Phosphate Rock. To be presented at the 8th Mill Operators Conference, 21-23 July 2003, Townsville, Australia.
  • Ojeda Escamilla, C., Reyes-Bahena, J.L. (2005). Importance of mineralogy in the flotation of copper sulphide minerales, Proceedings of the XXIV Congreso Internacional de Mineria, 12-15 October, Veracruz, Ver., Mexico (In Spanish).
  • Ojeda Escamilla, M.C., Gonzalez I., Lazaro Baez, M.I., Robledo Cabrera, A., Reyes Bahena, J.L., Lopez Valdivieso, A. (1998). Arsenopyrite flotation with XIS collector, Proceedings of the VIII Congreso Internacional de Metalurgia Extractiva, 27-29 Mayo, Mexico, D.F. (In Spanish).
  • Ojeda-Escamilla, M.C., Reyes-Bahena, J.L., Aragon-Piña, A. (2010). Mineralogical characterization applied to the mining industry, Proceedings of the Convencion Minera del Bicentenario, October 27-30, Ixtapa, Zihuatanejo, Gro., Mexico (In Spanish).
  • Onederra, I. and Esen, S. 2003. Selection of inter-hole and inter-row timing for surface blasting - An approach based on burden relief analysis, Proceedings of EFEE Second World Conference on Explosives and Blasting Technique, Prague, Czech Republic, pp. 269-275.
  • Onederra, I. and Esen, S. 2004. An alternative approach to determine the Holmberg-Persson constants for modelling near field peak particle velocity attenuation, FRAGBLAST Journal. 8(2), pp. 61-84.
  • Onederra, I., Esen, S. and Jankovic, A. 2004. Estimation of fines generated by blasting - applications for the mining and quarrying industries, Transactions of the Institution of Mining and Metallurgy, Vol 113, pp. A237-A247.
  • Ornelas Tabares, J., Madrid Ortega, I., Reyes-Bahena, J.L., Sánchez Lopez, A.A., Valdez Pérez, D., Lopez Valdivieso, A. (2006). Surface properties and floatability of molybdenite, Proceedings of the 2006 China-Mexico Workshop on Minerals Particle Technology, A. López Valdivieso, S. Song, J.L. Reyes-Bahena (Eds.), 5-7 December, San Luis Potosi, S.L.P., Mexico.
  • Özcan, Ö., Aydoğan, N., Benzer, H., Sönmez, B., Ağyüz, M. (2010), Modelling and Simulation of Grinding Circuit in Lahanos Copper Concentrator, 12th International Mineral Processing Symposium, 6-8th Oct., Cappadocia Nevşehir-Turkey, pp 1129-1135.
  • Pérez Alonso, C.A., Reyes-Bahena, J.L., Ojeda Escamilla, M.C. (2008). Optimization of grade-recovery of sulphide minerals through a statistical analysis, Proceedings of the XIV Encuentro sobre Procesamiento de Minerales, J. Zapata and M. Zapata (Eds.), 8-10 October, San Luis Potosí, S.L.P., Mexico (In Spanish).
  • Powell, M., Valery Jnr., W. (2006) Slurry Pooling and Transport Issues In SAG Mills. SAG2006 – Operations and Maintenance. International Conference on Autogenous and Semiautogenous Grinding Technology, Volume 1, 133 – 152, Vancouver, Canada.
  • Powell, M., Condori, P., Smit, I., Valery Jnr., W. (2006) The Value of Rigorous Surveys – The Los Bronces Experience. SAG2006 – Operations and Maintenance. International Conference on Autogenous and Semiautogenous Grinding Technology, Volume 1, 233 – 248, Vancouver, Canada.
  • Radzisewski, P., and Valery Jnr., W. (1999) Cadia SAG mill simulated charge behaviour. Proceedings of 31st Annual Meeting of the Canadian Mineral Processors, Ottawa, Canada, pp267-283.
  • Renner,D., La Rosa. D., DeKlerk, W., Valery Jnr., W., Sampson, P., Bonney Noi, S., Jankovic, A. (2006) Anglogold Ashanti Iduapriem Mining And Milling Process Integration And Optimisation. SAG2006 – Operations and Maintenance. International Conference on Autogenous and Semiautogenous Grinding Technology, Volume 1, 249 – 264, Vancouver, Canada.
  • Reyes-Bahena, J.L. (2001). Modelling and simulation of the grinding circuit at ‘El Pilon’, Proceedings of the 10th JKMRC Student Conference, JKMRC, University of Queensland, Brisbane, Australia, 19 October, pp. 181-196.
  • Reyes-Bahena, J.L., 2002. Evaluation, modeling and simulation of the MIM flotation circuit to increase revenue, Proceedings of the 11th JKMRC Student Conference, JKMRC, University of Queensland, Brisbane, Australia, 4 November, pp. 181-196.
  • Reyes-Bahena, J.L. (2006). Optimization of flotation circuits by computer simulations, Proceedings of the XIII Encuentro sobre Procesamiento de Minerales, M. Zapata and J. Zapata (Eds.), 11-13 October, San Luis Potosi, S.L.P., Mexico (In Spanish).
  • Reyes-Bahena, J.L. (2010). Horomill vs Conventional Ball Mill Application in Fine Cement Grinding, Proceedings of the XV Encuentro sobre Procesamiento de Minerales, J. Zapata and M. Zapata (Eds.), October 11-13, San Luis Potosí, S.L.P., Mexico (In Spanish).
  • Reyes-Bahena, J.L., Franzidis, J.P., Manlapig E.V., Lopez Valdivieso, A., Escamilla Ojeda, M.C. (2006). Assessment of reagent and regrinding in a flotation circuit, Proceedings of the CIME 2006, A. Uribe Salas and F. Nava (Eds.), 26-28 April, Saltillo, Coah., Mexico.
  • Reyes-Bahena, J.L., Genc, O., Navarro, J. (2006). Circulating load effect on model parameters in a cement grinding circuit, Proceedings of the CIME 2006, A. Uribe Salas and F. Nava (Eds.), 26-28 April, Saltillo, Coah., Mexico (In Spanish).
  • Reyes Bahena, J.L., López Valdivieso, A., Ibarra Amaya, A., Oliva Rangel, S. (1998). Simulation and optimization of grinding circuit: design and implementation of grinding in series, Proceedings of the IX Encuentro sobre Procesamiento de Minerales, M. Zapata and J. Zapata (Eds.), 11-14 August, San Luis Potosi, S.L.P., Mexico (In Spanish).
  • Reyes-Bahena, J.L., Lopez-Valdivieso, A., Ibarra-Amaya, A., Oliva-Rangel, S., Davila-Santos, H. (1999). Grinding circuit in series with classification in closed circuit by computer simulation, Proceedings of the XXIII Congreso Internacional de Mineria, 23-27 October, Acapulco, Guerrero, Mexico (In Spanish).
  • Reyes-Bahena, J.L., Lopez-Valdivieso, A., Leyva-Ramos, R. (1995). Temperature and fluoride ion effects on the electrokinetics of -Al2O3, Avances en Ingenieria Quimica, 5, pp. 60-63 (In Spanish).
  • Reyes-Bahena, J.L., Lopez Valdivieso, A., Manlapig, E.V., Franzidis, J.P. (2006). Optimization of flotation circuits by modelling and simulation, Proceedings of the 2006 China-Mexico Workshop on Minerals Particle Technology, A. Lopez Valdivieso, S. Song, J.L. Reyes-Bahena (Eds.), 5-7 December, San Luis Potosi, S.L.P., Mexico.
  • Reyes Bahena, J.L., López Valdivieso, A., Zapata Espinosa, A. (1997). Silver recovery from minerals with high manganese content, Proceedings of the XXII Congreso Internacional de Mineria, 13-17 October, Acapulco, Gro., Mexico (In Spanish).
  • Reyes Bahena, J.L., Lynch, A.J., Ibarra Amaya, A., Oliva Rangel, S., López Valdivieso, A. (1998). Grinding in series at El Pilon: circuit design and optimization, Proceedings of the VIII Congreso Internacional de Metalurgia Extractiva, 27-29 Mayo, Mexico, D.F. (In Spanish).
  • Reyes-Bahena, J.L., Manlapig E.V., Lopez-Valdivieso, A. (2005). Evaluating the extra-capacity of the retreatment flotation bank by modelling and simulation, Proceedings of the XXIV Congreso Internacional de Mineria, 12-15 October, Veracruz, Ver., Mexico (In Spanish).
  • Reyes-Bahena, J.L., Ojeda-Escamilla, M.C. (2010). JKSimMet: Powerful tool to optimize grinding circuits, Proceedings of the Convencion Minera del Bicentenario, October 27-30, Ixtapa, Zihuatanejo, Gro., Mexico (In Spanish).
  • Reyes-Bahena, J.L., Palafox Méndez, C., de la Fuente Zamarripa, D., Castillo, J. (2010). Redesign of the zinc flotation circuit through mathematical modeling, Proceedings of the XV Encuentro sobre Procesamiento de Minerales, J. Zapata and M. Zapata (Eds.), October 11-13, San Luis Potosí, S.L.P., Mexico (In Spanish).
  • Reyes-Bahena, J.L., Robledo-Cabrera, A., Lopez-Valdivieso, A., Herrera-Urbina, R. (2002). Fluoride adsorption onto a-Al2O3 and its effect on the zeta potential at the alumina-aqueous electrolyte interface, Separation Science and Technology, 37(8), pp. 1973-1987.
  • Runge, K.C., McMaster, J., Wortley, M., LaRosa, D., and Guyot, O., A correlation between VisioFroth Measurements and the Performance of a Flotation Cell, Proceedings of Ninth Mill Operator Conference, Perth, Australia.
  • Runge, K.C., Alexander, D., Morrison, R.D., Franzidis, J.P. and Manlapig, E.V., 1998. JKSimFloat - A Tool for Flotation Modelling. Proceedings AusIMM Annual Conference, Mt Isa, 19-23 April, 1998, 361 – 370.
  • Runge, K.C., Franzidis, J.P. and Manlapig, E.V., 2004. Optimisation of flotation pulp selectivity using nodal analysis. Proceedings of the 34th Canadian Mineral Processors Conference, Ottawa, Canada, January, 2004
  • Runge, K.C., Franzidis, J.P., Manlapig, E.V., 2001. Monte Carlo Analysis of the floatability component approach used for flotation modelling., Proceedings of the 6th Southern Hemisphere Meeting on Mineral Technology, Rio de Janeiro, Brazil, Volume 1, 153-159.
  • Runge, K.C., Franzidis, J.P., Manlapig, E.V., Harris, M.C., 2003. Structuring a flotation model for robust prediction of flotation circuit performance. Proceedings 22nd IMPC Conference, Cape Town, South Africa, September
  • Runge, K.C., Franzidis, J.P., Manlapig, E.V., 2003. A study of the flotation characteristics of different mineralogical classes in different streams of an industrial circuit. Proceedings 22nd IMPC Conference, Cape Town, South Africa, September
  • Runge, K.C., M.C. Harris, J.A. Frew, and E.V. Manlapig. 1997. Floatability of streams around the Cominco Red Dog lead cleaning circuit. Proceedings 6th Annual Mill Operators Conference. AusIMM, Publication series 3/97. 157-163.
  • Runge, K.C., M.E. Dunglison, E.V. Manlapig and J.P. Franzidis. 2001. Floatability component modelling – a powerful tool for flotation circuit diagnosis. Proceedings 4th International Symposium on Fundamentals of Minerals Processing. CIM. 93-107.
  • S. Esen, H. Dundar, H. Benzer. Exploring the potential use of Barmac B-series vertical shaft impactors in cement plants. XII Balkan Mineral Processing Congress 10-14 June 2007, Delphi, Greece.
  • Song, S., Lopez-Valdivieso, A., Reyes-Bahena, J.L. (1999). Hydrophobic flocculation applied to fine mineral and coal processing, Proceedings of the XXIII Congreso Internacional de Mineria, 23-27 October, Acapulco, Guerrero, Mexico.
  • Song, S., Lopez-Valdivieso, A., Reyes-Bahena, J.L., Bermejo-Perez, H.I. (2001). Hydrophobic flocculation of sphalerite fines in aqueous suspensions induced by ethyl and amyl xanthates, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 181, pp. 159-169.
  • Song, S., Lopez-Valdivieso, A., Reyes-Bahena, J.L., Bermejo-Perez, H.I., Trass, O. (2000). Hydrophobic flocculation of galena fines in aqueous solution and floc flotation, Journal of Colloid and International Science, 227, pp. 272-281.
  • Song, S., Lopez-Valdivieso, A., Reyes-Bahena, J.L., Lara-Valenzuela, C. (2001). Floc-flotation of galena and sphalerite fines, Minerals Engineering, 14(1), pp. 87-98.
  • Sönmez, B., Baş, E., Günay, E., Kara, M. (2003). Possibilities of The Use of Erdemir BOF Slag as Aggregate for Asphaltic Concrete and Railway Balast Material, 2nd Iron and Steel Symposium, Zonguldak, October 2003, pp 153-165 (In Turkish)
  • Sönmez, B., Demirel, H. (1992). The Simplification of Bond Grindability Test Using Simulation Techniques, 4th International Mineral Processing Symposium, 20-22th Oct., Antalya-Turkey, pp 56-65.
  • Sönmez, B., Demirel, H. (1996), Determination of Breakage Parameters in Laboratory Scale Ball Mill and Scale-up of Ball Milling, in Changing Scopes in Mineral Processing, Eds:Kemal, M., Arslan, V., Akar, A., Canbazoğlu, M., A.A. Balkema Publishers, pp 617-622.
  • Souers, P.C., Vitello, P., Esen, S. and Bilgin, H.A. 2004. The Effects of Containment on Detonation Velocity, Propellants, Explosives, Pyrotechnics, 29(1), pp. 19-26.
  • Strohmayr, S. and Valery Jnr., W. (2001) SAG Mill Circuit Optimisation At Ernest Henry Mining. SAG2001 - SAG mill circuit. International Conference on Autogenous and Semiautogenous Grinding Technology, 1, p., Vancouver, Canada
  • Tondo L.A., Valery Jnr. W., Peroni, R., La Rosa, D., Silva, A., Jankovic, A., Colacioppo, J. (2006) Kinross’ Rio Paracatu Mineração (RPM) Mining And Milling Optimisation Of The Existing And New SAG Mill Circuit. SAG2006 – Circuit Design. International Conference on Autogenous and Semiautogenous Grinding Technology, Volume 2, 301 – 313, Vancouver, Canada.
  • Valery, W., Jankovic, A., La Rosa, D., Dance, A., Esen, S. and Colacioppo, J. (2007). Process integration and optimisation from mine-to-mill. Proceedings of the International Seminar on Mineral Processing Technology, pp. India. 577-581.
  • Valery Jnr. W. (2004) Process Integration and Optimisation in Aggregates Production, presented at the 2nd International Seminar on Construction Aggregates, Campinas, Brazil. 25-28 October 2004.
  • Valery Jnr. W. and Jankovic, A. (2004) Multi-Stage Crushing versus SAG Mill and HPGR, presented at the 5th Annual I.I.R. Crushing and Grinding Conference, Townsville, Australia. 29-30 March 2004.
  • Valery Jnr., W. (1996) The development of a dynamic model for autogenous and semi-autogenous grinding. Journal of Mining and Metallurgy, Technical Faculty Bor, University of Belgrade and Copper Institute Bor, 32(1), p. 27-45.
  • Valery Jnr., W. (1997) A model for dynamic and steady-state simulation of autogenous and semi-autogenous mills. Doctor of Philosophy Thesis submitted in October 1997. JKMRC, University of Queensland, Australia.
  • Valery Jnr., W. and Jankovic A. (2002) The Future of Comminution. Proceedings of 34th IOC on Miming and Metallurgy 2002 Conference, Bor Lake, Yugoslavia, 30 Sep. -3 Oct.
  • Valery Jnr., W. and Morrell, S. (1997) A dynamic and steady-state model of autogenous and semi-autogenous mills. Paper presented at the International Conference Comminution '98, in Brisbane, Australia, from February 16-18, 1998.
  • Valery Jnr., W. and Morrell, S. (2001) JKSagCharge – A tool to estimate AG/SAG mill charge volume and position online presented at Comminution 2001 Conference in Brisbane, Australia, 21-23 March.
  • Valery Jnr., W., and Morrell, S. (1995) The development of a dynamic model for autogenous and semi-autogenous grinding. Minerals Engineering, 8(11), p. 1285-1297.
  • Valery Jnr., W., et al. (2001) Mine to mill optimisation and case studies presented at VI Southern Hemisphere Conference on Minerals Technology in Rio de Janeiro, Brazil, 27-30 May.
  • Valery Jnr., W., Kojovic, T., Tapia-Vergara, F. and Morrell, S. (1999) Optimisation of blasting and sag mill feed size by application of online size analysis. IRR Crushing and Grinding Conference, Perth, WA 29-31 March.
  • Valery Jnr., W., La Rosa, D., Jankovic, A. (2004) Mining and Milling Process Integration and Optimisation, presented at the SME 2004 Conference, Denver, CO. 23-25 February 2004.
  • Yavuz Atasoy, Valery Jnr., W., Andrew Skalski (2001) Primary Versus Secondary Crushing At St. Ives (WMC) SAG Mill Circuit. SAG2001 - SAG mill circuit. International Conference on Autogenous and Semiautogenous Grinding Technology, 1, p., Vancouver, Canada.