• Wood handling
• Chemical pulping
• Recausticizing
• Pulp drying
• Process overview
• Improvement products
• Air filter
• Bale press – Belt guide
• Bale press – Expander pin
• Bale press – Photocell upgrade PR-15
• Bale press – New pre-press and return cylinder design
• Bale stack binder – Upgrade packages for type BBA-2124
• Bale stack binder – Upgrade packages for the press unit
• Bale stacker – Upgrade package for type SLA
• Cutter Layboy
• Cutting arm with replaceable cutting edge
• DryWay Wet end
• Exchange valve for PFC/PAM presses
• Exchange valve V5
• FillMax
• Folding machines – Upgrade packages for type VKC
• Hydraulic hoses instead of pipes
• Improved oil cooler/filter unit
• Improved used oil tank
• New downfeed device for slab press
• New main pumps
• New main valve unit
• Optimized oil filtration
• Robotyer – Upgrade packages for type BBE-1006
• Robotyer – Upgrade packages for type BBE-2124
• Slab press – Press stamp with separate hydraulic cylinder
• Slab press – Rebuild of infeed motors
• Slab press – Rebuild of press moulds
• Tension bars
• Tying machines – Upgrades for type BBA/BBC-1207
• Wire Cage
• Spare and wear parts
• Workshop services
• Agreements
• Mill site services
• Filter fabrics and services
• Mechanical pulping
• Fiberboard
• Recycled fiber

Bale/Slab presses - New main pumps

If the press capacity needs to be increased or existing pumps are worn, Metso can deliver complete pump units, ready for use, to be fitted to the hydraulic platform.

Pumps type Truninger QT 63-125 can be replaced without replacing the mounting flange. When it comes to other makes and types, the mounting flange must be replaced.

Existing pipes or new hoses can be used, depending on what is desired. The pumps can be delivered with or without electric motor.