Trellex wear lining is a range of wear protection solutions that minimize wear and reduce noise while increasing service life. Trellex wear lining products can be installed in chutes, spouts, hoppers, transfer points, and other applications subjected to wear. Trellex wear systems, on the other hand, are developed for example screens, crushers, mills, washing drums, concrete mixers and wet applications in mind.
Trellex Poly-Cer

Trellex Poly-Cer

Trellex Poly-Cer is designed to be extremely resistant to abrasion even in high material flows and speeds. The unique design of ceramic inserts improves wear life and impact resistance while proventing material build-up in wet applications.

Trellex Poly-Cer 10S, 20S, 38S and 70S are engineered using T60 wear rubber with built-in ceramics and enhanced with fixed hot-vulcanized steel reinforcement. Poly-Cer 4S is engineered using wear rubber with built-in ceramics hot-vulcanized together and combined with a contact layer.

Excellent wear resistance in applications with sliding wear and high material speeds, particularly where the material has only a slight impact angle. Poly-Cer WB 100/38S is designed with built in ceramics into wear rubber at the top of the bar and at the bottom part a hot-vulcanized aluminum track for the T-bolt fastening system.

Different fixing methods alternative guarantee secure fixing. Poly-Cer also reduces noise and vibration.

Application areas
Application areas

Poly-Cer provides excellent wear protection for feeders, bins, transfer chutes, silos, transfer points and any other applications that are subject to heavy wear and noise.

Poly-Cer is ideal for medium-heavy rock and gravel industry, or for secondary and lighter applications. Poly-Cer 4S is optimized for medium to light mining, rock and gravel industries with lighter applications.

Trellex SQ300

Trellex SQ300

Fully recyclable light-weight modular system for wear protection.

At last, the mining and construction industry has access to a modern environmentally friendly wear protection system which reduces impacts and improves health and safety in a variety of important ways - all without increasing costs or sacrificing operational efficiency.

Trellex SQ300 provides excellent protection in many applications, keeping material flow up and maintenance time down. Trellex SQ plates are available in three different materials: rubber, polyurethane or ceramic (not recyclable).

Application areas and installation
Application areas and installation

Suitable for use in chutes, transfer points and other areas subject to wear.

Trellex SQ has been designed for simplicity of installation and minimum downtime by using patented fastening system.

Installation manual in each box provides guidelines for easy installation. Rubber and polyurethane are easily cut with a knife or Metso Alu-Cut machine.

Trellex wear elements
Trellex PP
Trellex PP

Trellex PP wear plates are manufactured from T60 wear rubber and with hot-vulcanized steel reinforcement.

  • Excellent wear resistance in applications with both impact and sliding wear.
  • Wear plates reduces noise and vibrations.
  • First class wear protection in applications such as chutes, feeders, channels, silos etc.
Trellex PT

Trellex PT wear plates are manufactured from T60 wear rubber and include hot vulcanized aluminum fixing profiles.

  • Excellent wear resistance in applications with both impact and sliding wear.
  • Vulcanized aluminum profiles allow fewer fixing points.
  • Reduce noise and vibration.
  • Excellent wear protection for feeders, chutes etc.
Trellex PT
Trellex SP
Trellex SP

Trellex SP wear plates are manufactured from T60 wear rubber. They feature a serrated surface and with hot-vulcanized steel reinforcement.

  • Excellent wear resistance in applications with both impact and sliding wear.
  • Reduce noise and vibration.
  • Optimal for material with impact angles between 15° and 50°.
  • Excellent wear protection for chutes, transfer points etc.
Trellex PPU

Trellex PPU wear plates are made of polyurethane and backed with a cast-in steel reinforcement.

  • Excellent wear resistance in lighter applications with sliding wear.
  • Reduces noise and vibrations.
  • Excellent wear protection in chutes, channels etc.
Trellex PPU
Trellex SB
Trellex SB

Trellex SB wear plates are manufactured from T60 wear rubber with molded holes for fixing. The holes are reinforced with fixed hot vulcanized embedded steel washers.

  • Excellent wear resistance in applications with both impact and sliding wear.
  • Bendable and easy to cut.
  • Reduce noise and vibration.
  • Excellent wear protection for feeders, bins, chutes, silos etc.
Trellex WB

Trellex WB wear bars are manufactured from T60 wear rubber and include hot-vulcanized aluminum fixing profile.

  • Excellent wear resistance in applications with both impact and sliding wear.
  • The embedded aluminum profile allows for fewer fixing points.
  • Reduce noise and vibration.
  • Excellent wear protection for bins, chutes, silos etc.
Trellex WB
Trellex Flexback
Trellex Flexback

Trellex Flexback is manufactured from T60 wear rubber or polyurethane. It is hot-vulcanized or casted-in with an embedded perforated steel reinforcement.

  • Excellent wear resistance in lighter and medium applications.
  • The reinforcement makes it possible to construct self-supporting channels or chutes with simple supports of angle iron and flat iron.
  • Reduce noise and vibration.
  • Excellent wear protection for chutes, channels, bins etc.
  • Bendable and easy to cut with Metso Alu-cut machine.
Trellex Flexback Serrated

Trellex Flexback Serrated is manufactured from T60 wear rubber and is hot vulcanized with embedded, perforated steel reinforcement and is optimized for handling material impacting at angles between 15° and 50°.

  • Excellent wear resistance in lighter and medium applications with both impact and sliding wear.
  • Reduce noise and vibration.
  • Excellent wear protection for chutes, channels, bins etc.
  • Bendable and easy to cut with Metso Alu-cut machine.
Trellex Flexback Serrated
Trellex wear plates
Trellex LF
Trellex LF

Trellex LF plates are made of an ultra-high molecular weight polyethylene that minimizes surface friction to prevent material sticking.

  • Excellent for applications that require extremely low friction.
  • Increase material flow.
  • Prevents material sticking.
  • Excellent solutions for chutes, bins, silos and other low wear application that have flow problems with sticky material.
Trellex lining solutions for screens
Trellex lining solutions for screens
Trellex lining solutions for screens

The lining solution for screens includes a variety of options suitable for dry or wet screening applications. The solution is based on either Trellex PP wear rubber system or Trellex Poly-Cer system or a combination of both.

  • Trellex PP in application with both impact and sliding wear.
  • Trellex Poly-Cer for improved wear life and impact resistance.

The mining solution offers a unique overlap sealing system to avoid material build-up between lining and screen. Available as a standard solution for Metso screens and tailormade solution for other screen brands.

Trellex wear sheeting

Trellex wear resistant sheeting

Installing Trellex wear resistant sheeting from Metso is identical with good operating economy and reduced risk of breakdowns. Since the early 1960’s, Metso has gained considerable, worldwide experience not only in the applications of such, but also in how to consistently produce high quality products.

Increases your uptime

Trellex wear sheeting has proved a long wear life in comparison with other wear materials like steel. The result is that you simply don´t need to change lining as often. Fewer stops and less production losses increase your profitability. Depending on application you can choose from rubber or polyurethane wear sheeting.

Caring for working environment

Improving the working environment is more important than ever, both for the health and safety of co-workers and to satisfy regional legislative demands. Hearing damage is one of the biggest problems experienced by the workers. Trellex wear rubber sheeting from Metso generates less noise than traditional steel lining and therefore contributes significantly to reduce this problem. Additionally, Trellex wear resistant rubber is lighter in weight compared to steel, making it easier to handle in most applications. This means a reduced risk of injuries associated with carrying heavy loads.

Applications

If you have fine material in wet applications or when you need a more oil and ozone resistant material than rubber, we recommend wear sheeting made of polyurethane.

trellex-t40.jpgT40 trellex-t60.jpg T60trellex-tr60.jpgTR60

Wear Lining and Sheeting Handbook
A toolbox for everyone interested in linings. Presents the possibilities and helps in selecting the optimal lining solution for your application.

Downloads

Contact Metso experts

Mining
Aggregates
Please select your area of interest above.
Your information is safe. Check our privacy notice for more details.
Thank you!
We will shortly contact you. You can send a new inquiry again after 15 minutes.
Contact