The all-electric operation and internal generator make the LT1213SE a very efficient and versatile mobile crushing plant. The dual-slope screen and 90° radial return conveyor provide high on-board screening capacity, allowing easy use of the Lokotrack LT1213SE in closed and open circuits.
In just a few minutes, the screen unit can be docked and the plant fine-tuned for aggregate, quarry or recycling applications. Features like a vibrating grizzly or pan feeder under the crusher increase versatility even further, providing even more benefits in asphalt crushing and similar applications.
Lokotrack LT1213SE comes with new tools to help change the blow bars and breaker plates more easily. Special attention has been paid to access the service locations and enable trouble-free material flow. Additionally, the plant’s stand-by function helps save fuel and reduce noise when idling.
- The highest possible efficiency and profitability with an all-electric drive
- The internal generator can be used when there is no external grid available
- Great capacity
- Calibrated end products with a single unit
- Flexibility in applications - quarry and recycling with the same unit
- Easy to use and operate
Lokotrack LT1213SE is the most common all-electric unit in recycling applications, including top soil, concrete, asphalt and demolition waste. It is also the perfect choice for limestone quarry applications. The LT1213SE works well with other Metso Lokotrack plants and can utilize the Metso ICr™ remote monitoring based wireless interlocking or interlocking cable.
How it works
The material is fed onto the feeder by an excavator or wheel loader. The two-stage scalping section removes the fines, which can be then guided to the main conveyor or a 180° radial side conveyor. Nordberg NP1213 impact crusher crushes the feed material to the desired size. The output material size is controlled by the crusher’s setting. The crusher features a direct drive for the best efficiency.
Metso's advanced dual-slope screen separates end products effectively and any oversize material can be returned to the crusher. The radial return conveyor can be turned to a 90° angle when the material is used as an end product.
The magnetic separator is used to separate metals from the feed material. All dust emissions are minimized with an advanced encapsulation and high-pressure water spraying system.
|Feed opening||1 320 x 900 mm (52 x 35 ½”)|
|Engine||CAT®, 310 kW / 420 kVA (415 hp)|
|Weight||56 000 kg (123 460 lbs)|