How has Metso helped our customers increase performance and reduce CAPEX?
Metso Nordberg® HP900 cone crushers are an upgrade to our HP800 unit. The HP900 comes with new kinematics, a compact design and automation system that ensures an increase in performance while also reducing CAPEX.
Reduce installation time and costs by 50%
Robust components and compact design
15% capacity increase and large clearing stroke
Ease of maintenance
2 hour liner replacement
Nordberg® HP900 - A forward step in performance and cost efficiency
The Nordberg® HP Series has over 10,000 installations worldwide in a range of aggregate and mining applications. This equipment is well known as a market leader and continues to improve that point even further.
The Metso's Nordberg® HP900 comes with a new kinematic design and raised pivot points, but still shares about 80% of the same components are previous HP models. So we understand that this is new technology, but comes from a strong legacy in cone crushing so you can expect results.
The Nordberg® HP900 cone crusher is simple to integrate and install into any greenfield or brownfield plant. The drive system is pre-assembled and does not require any on-site construction. It also comes pre-wired with our integrated automation system, which minimizes adjustments and set-up usually needed before commissioning the crusher.
All HP900 cone crushers are factory tested before arriving on site, eliminating unnecessary downtime.
Because of the HP900 cone crusher being pre-assembled, pre-wired and factory tested before arriving to the site, installation costs and time are reduced by 50%. The compact design provides a reduced plant footprint meaning your production will come from a smaller foundational requirement. Getting more from less.
Our components are built robust. Specifically our thick liners are increasing component lifetime by up to 75%.
The HP900 cone crusher with the new kinematics and raised pivot point resulting in a 35% higher stroke than the HP800. This also leads to an increased capacity of 15% and a 35% higher crushing force.
Also, the HP900 cone crusher comes with a 360 feeding area. This combined with the higher stroke reduces bridging and allows for better top size acceptance. All resulting in maximizing performance.
Ease of maintenance
The Nordberg® HP900 cone crusher provides top service access for all major components including the head, shaft, eccentric and more. Additionally, Metso wear parts can be replaced in just 2 hours compared to 8 hours with other similar cone crushers.
For more questions related to the Nordberg® HP900 cone crusher, please contact your local Metso representative using the contact forms below.
Built for optimized performance
The Nordberg® HP900 cone crusher combines optimal performance and cost efficiency to provide maximum productivity.
Check out the video to see and learn more about the Nordberg® HP900 cone crusher.
Metso IC™ crusher automation
Metso IC70C™ is a crusher automation system that further improves the operation of your Nordberg® HP cone crusher. Using it can increase your production by more than 10%.
With Metso IC70C™ you can control maintenance, setting modifications, production follow-up and data extraction. All parameters can be adapted to your plant characteristics, and you can easily do all this close to the crusher or remotely from the control room.
You set the goals and Metso IC70C™ helps you reach them. It allows you to monitor the feeding, change the settings automatically depending on the load or liners wear, and select the product size distribution according to your preference of coarse or fine aggregate production.
Nordberg® HP900 cone crushers' technical specifications
Contact Metso experts
Please select your area of interest above.
Your information is safe. Check our privacy notice for more details.
We will shortly contact you. You can send a new inquiry again after 15 minutes.